1955 HOT ROD PICKUP STREET BUILT CUSTOM NO RAT ROD HERE BLUE PRINT MOTOR DYNO'D

Condition:	Used
Make:	Chevrolet
Model:	Other Pickups
SubModel:	custom
Type:	pickup
Trim:	stock
Year:	1955
Mileage:	50,000
VIN:	3a56l017495
Color:	black
Engine:	400
Cylinders:	8
Fuel:	Gasoline
Transmission:	summit racing 350
Drive type:	automatic 2 wheel drive
Interior color:	two tone
Vehicle Title:	Clear
Item location:	Lockport, New York, United States

Extras

Listed by

Private seller

Enquire

Description of 1955 Chevrolet Other Pickups custom

I have to get the usual out of the way first so please read these terms. If you can't understand them please ask or don't bid. There is a500.00 payment due immediately after you win. This is non-refundable. Ask every question. I will answer them all to the best of my ability. I don't play games, on't need pen pals or picture collectors, nd what you see is what it is. There are many videos and pictures andthey areall current. I will only sell to the areas specified in my listing. Funds are due in U.S. currency. Only the deposit isPayPal. Therest is wire transfer or good old U.S.A Cash in person. No other methods. This a1955 truck and there is no warranty expressed or implied anywhere in this sale. As is where is. Zero feedbacks or negative feedbacks in the past 90 days do not bid. Must have at least 10 transactions. The truck is listed locally. When reserve is met the auction will run to the end. But can be pulled at my desire for local sale sobid with this in mind. So bid what you're willing to pay, ot play. Check my feedback as a seller. I've sold world wide. I will not disclose my reserve. If you are serious you will bid to own it. Vehicle is to be picked up within 30 days. Tractor trailers can pull right up to my door, am off a major route.

The most important detail is the truck sits low andserious, o your shipper should have a drive on lift gate not ramps. Or make provisions to drive this up ramps, will assist any way I can.

Thank you for taking the time to look at this cool Rod truck. Here are some links to videos of the truck, alk around, unning, aying a little rubber ( hey it's built to be used )

https://www.youtube.com/watch?v=P7dv461nrWk (walk around) https://www.youtube.com/watch?v=DMK3omnd3kY (walk around #2) https://www.youtube.com/watch?v=YLIJyLtbJrU (starting /walk around)

https://www.youtube.com/watch?v=_mmfhPZwCgU ( driving out of garage with a little chirp ) https://www.youtube.com/watch?v=46Ybf4tQGXI ( driving with a little rubber down )

https://www.youtube.com/watch?v=Pyflrjj0erQ (driving back at you) Don't assume by the videos that this truck gets beaten up. I just wanted everyone to see this is no sissy rod. I treat this truck respectfully.

That's six current videos, here will be no joy rides. It's our rain seasonso truck will not move until you or your shipper arrives. Any issues with the videos go to www.youtube.com/radrodsbycarrero

Motor: Built by blue print engines. Purchased through Summit racing. I have the factory dyno sheet rated at 416.7 horse power at 370 foot pounds of torque.

Compression Ratio: 10.0:1
Aluminum Heads
Hypereutectic Pistons
Flat Tappet Cam
Cast Steel Crank
Part #: BP3834CT1

Block: 4 bolt main 1pc rear seal block w/Passenger side dipstick only
Square and parallel decked
Align honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness
Cylinders are sonic tested for thickness

RotatingAssembly: New cast steel crankshaft
Flat top hypereutetic pistons
Chevy heavy beam rods with 150,000 psi bolts
Hastings Moly rings
Balanced rotating assembly
Melling high volume oil pump
Hydraulic flat tappet camshaft
Heavy duty double roller timing setCylinderHeads: BluePrint Performance aluminium
Hardened retainers and springs
2.02 swirl polished intake valves
1.60 swirl polished exhaust valves
BP Aluminum Part# H8002K
CamSpecs Flat tappet, 480 Intake / .486 Exhaust & 229 Intake / 230 Exhaust duration @ .050 / ignition timing 34 degrees total at 3500 rpmTransmission is a Summit Racing 350 with a 2400 stall perfect for the street, ives just enough snap when you want it. with a 373 posi rear So at cruising speed it's not overly aggressive or too much for the street.

The motor as you can see in pictures has polished Edelbrock Intake and Matching 750 carb. Has pulleys like a blower set up so has a blower vibe with that 3 inch belt. Aluminum radiator with an electric fan automatic on key start, ever runs hot in any traffic condition 150-160 all day long. I installed side windows with all new inner door mechanics and crank with weather seals (up and down like new) . Wiper motor was recently updated to two speed with new arms and blades. New glove box button and inner box container. 4 wheel disc brakes with custom rims backed by summit racing proportioning valve to L.e.d tail lights. As you can tell from the videos if your foot is heavy it has a wicked mad sound. At cruising speeds she levels right off and you can have a normal conversation when driving. Lights blinkers brake lights parking lights horn all works. New wiring. No speedo I use a gps. No radio sorry I like the trucks music better. No rust on the body, ndercarriage looks just as nice and very sanitary. Satin cleared hot rod black. Can wipe or wash not a primer job. Diamond Plate box floor. Custom tail gate and roll pan. Even the front bumper valance was trimmed to suck the bumper tight to the body. Classic instruments gauge cluster and new steering wheel. Ididit tilt steering. Redone bench seat in tan.

It's built to have attitude, t's built to lay down some rubber if you want. It's built to be a truck. It sit's low. Look at pictures. No tire rub turning, as power steering. ( it sits low) remember this when shipping it.

Not built by me. Sorry I can't take the credit. The guys who did, id it with all the right intent. I hate to see it go if it does sell, have my heart set on a 1934-1939 rodsor a chopped custom rod at this time. Paper work is in my name. Clear. And this truck is Hagerty approved. My reserve is less than that. May only list once.

This is not a Chip Foose or Kindigit or any other famous build. Expect a used rod 1955 Tri Five Rod truck that will leave a drop here or there not a trailer sissy princess. Expect what is shown and videoed.

If you read my ad to this point you are a real Rod Person. If you like collectible auto memorabilia. I will be listing a custom Gene Winfield chopped mercury. It is a one of one with help by two other famous designers. Autographed by all three check my other ads for cool sh---t and custom parts.

On Oct-28-15 at 20:25:20 PDT, eller added the following information:

MY FINGERS MUST BETOO FAT, WROTE THE YEAR AS A 1955.THIS IS A 1956: WHAT CAN I SAY, ORRY IF IT IS NOT ALREADY OBVIOUS BY THE LOOK, HE TRUCK IS A 56. THANK YOU.