1988 S-10 bagged and body dropped

1988 Chevy S-10 bagged and traditional body dropped with shaved pinch molding off the bottom of the rocker, o it lays full rocker. Fully shaved firewallwithwheels tubs.Custom sheet metal dash with white face autometer gaugesand sheet metal door panels converted to splined door pulls along with the splined window cranks so the billet streetrod style pulls and cranks could be used.

Everything cab forward has been painted with Dupont base/clear except the cowl hood and the under side of it is painted but thetop sidewillstill need to have the DuPont 2k primer sandedand sprayed. Door handles, iper cowl, nntenaand front bumper were all shaved anddriver door is set-up to open using the keyin theOEM door lock.

The bedhas a raised floorwith wheel tubsand has had a rollpan and taillight fillers weld in,but it has not had the body workand paint done yet.

Ithas had the whole frame boxed in and hasa 4-link rear, ag over axle set-up. Fronthas tubular lower control arms and dropped spindles. Air ride is complete and fully functional. It has two new Viair 444's in black along with a skinny 5gal tank and 8 dumps with 10 switches and a custom console mounted presure gauge.Its alldone in 1/2"and is very fast on 200psi. Its actually too fast for me. should probably be slowed down, oth up and down. Truck will lay out on 20's andhas tubs toclear them, urrently has 18's with new tires and all the center caps even though the caps arenot in the pics.

The tail lights are 39' Ford tear drops with flame bezels mounted in the rear window along with the license plate frenched 3" into the window with a third brake light. It will also come with a stock back window and cadillac taillights with frenched bucketif someonewanted to put them in the bed.

It has low back bucket seats that were just picked up at the trim shop that i had customcovered in butterscotch leather. headliner is covered to matchand included is the material to cover the stock plastic trim panels for the rest of the interior. Also included is tan carpet ordered through the trim shop also needing installed.

This is a project and will need some work done, ut as u can tell from the pics its very close to being completed.All the major/hardwork is pretty much done. Mainly the truck needs the bed finished, nterior installed, lass installedand the lights wired. Everythingfor this truck is included to complete it, here will be several plastic totes of parts that come with it. This is a project still needing finishedand as such will need to be trailered. I'm sure I've left out tons of info and parts that are included? If you have any question about what you see or something you dont and want to know about just ask.....Thanks.

On Jun-04-15 at 08:10:54 PDT, eller added the following information:

May also consider trades up or down, f the reserve isn't meet at the end of the auction.