1966 Mustang Fastback & "A" code coupe
Condition: | Used |
Make: | Ford |
Model: | Mustang |
SubModel: | Fastback |
Type: | Fastback |
Year: | 1966 |
Mileage: | 70,000 |
VIN: | 6t09t106xxx |
Color: | Red |
Engine: | 2+2 fastback |
Cylinders: | 6 |
Transmission: | Automatic |
Drive type: | RWD |
Interior color: | Black |
Vehicle Title: | Clear |
Item location: | California, Maryland, United States |
Extras |
Listed by |
Private seller |
Description of 1966 Ford Mustang Fastback |
A complete 1966 t code fastback that I started a restoration on. Car has been sanded to bare metal, needs front frame replaced, but I have new dynacorn rails that go with the car. All the glass is good, other than welding the frame rails it is a solid car. I also have an "A" code coupe complete car with it. The coupe was to be the parts car, the floors and quarters are shot, but I was told the drive train was good with the original 289/225 hp automatic. Car needs more than my experience provides. Two mustangs in 1 auction with new front frame rails, radiator support, rear frame rail and already stripped for body work. It looks like the quarters were replaced and the floors have been replaced. Set at a low reserve, my loss is your gain. I have several more pictures I can email upon request. Also have complete suspension parts front and back, complete interior except seats that are good, all new led tail light assy, turn signals, reverse lights. I have over $4,000 in new parts from CJ Pony parts, all receipts go with the car. On Sep-11-16 at 17:48:00 PDT, seller added the following information: A complete 1966 t code fastback that I started a restoration on. Car has been sanded to bare metal, needs front frame replaced, but I have new dynacorn rails that go with the car. All the glass is good, other than welding the frame rails it is a solid car. I also have an "A" code coupe complete car with it. The coupe was to be the parts car, the floors and quarters are shot, but I was told the drive train was good with the original 289/225 hp automatic. Car needs more than my experience provides. Two mustangs in 1 auction with new front frame rails, radiator support, rear frame rail and already stripped for body work. It looks like the quarters were replaced and the floors have been replaced. Set at a low reserve, my loss is your gain. I have several more pictures I can email upon request. Also have complete suspension parts front and back, complete interior except seats that are good, all new led tail light assy, turn signals, reverse lights. I have over $4,000 in new parts from CJ Pony parts, all receipts go with the car. ****NOTE: both cars are located in New York not Maryland. **** On Sep-11-16 at 18:08:09 PDT, seller added the following information: Just reviewed a video that I took while sanding the car, and I mis-spoke, car is about 75% sanded, cowl, roof and a couple spots along the fastback section. Also didn't get to the fenders since I had them removed. Sorry for the confusion. On Sep-12-16 at 17:14:51 PDT, seller added the following information: ***Just to be clear the fastback is disassembled*** ***If you know how to weld or know a welder this is a great project*** I DID notice the third piece of the fold down seat was not there*** Again if you have questions or concerns please send me a message, I have the registration paperwork from previous owners for both vehicles, I never registered themHere is the list of new parts I have on hand:CJ Pony Parts:WEATHER STRIP65-66 Pair Door Weatherstrip65-66 Door Beltline Only 4 pc65-66 Hood to Cowl Seal65-66 Pair Door Run Weatherstrip65-66 Vent Division Bars Weatherstrip w/rivets65-66 Pair Door Post Seals65-66 Pair Vent Window Weatherstrip65-66 Fastback Rear Window Weatherstrip65-68 Windshield Weatherstrip65-66 Top Vent Window Seals65-66 Fastback Trunk Weatherstrip65-66 Fastback Pair Roof rails Weatherstrip65-68 Outside Beltline Weatherstrip end screws (2) |