1969 Ford Bronco Custom Restored -
Item Details -
Shipping -
Payment & Returns Features - Frame off restoration
- 302 V8 with around 400HP
- 20" Wheels w/ 37" Tires
- Spray in bedliner inside, underneath, & under hood
- Excellent mechanical condition
Description You are looking at a 1969 Ford Bronco that has had a frame off restoration. The body and frame where blasted and all rust was replaced with new metal in 2006. Then the underside, inside, and under hood areas were all coated with spray in bedliner. It has the original 302 V8, 3 speed manual transmission, dana 20 transfer case, and 9” rear end all of which were professionally rebuilt in 2009. A Hurts kit moved the shifter from the column to the floor plus the Dana 20 was converted to a twin stick and upgraded to the extreme duty output shaft. The original front end was swapped for a Dana 44 out of a 1975 and both were upgraded to 456 gears with lockers. Both drive shafts were replaced with extreme duty extended versions and as you can see in the photos the entire undercarriage was blasted and painted before reassembly. The engine was professionally machined and rebuilt using all new Lunati parts which claim to produce right at 400HP. Every part of the suspension has been replaced with new components including all new bushing and bolts. It was upgraded to power steering / power brakes plus all four corners were converted to disc brakes with all new stainless steel lines. It has a new 23 gallon fuel tank with braided stainless hoses. The front fenders, grille, hood, and doors are all fiberglass. All the holes were filled in the dash and new Auto Meter gauges were installed. It has a Flaming River tilt steering column with quick release wheel. All new Painless Wiring was installed. The front bumper, rear bumper, and roll cage where all professionally powder coated and new Corbeau suspension seats were installed. Pro Comp alloy 20” chrome wheels with Pro Comp Xterrain 37” x 13.5” tires. Aside from paint the project was completed in 2010 and since that time it has collected 933 miles. For those of you considering building a Bronco let's go over a few costs 1) Vehicle itself $5,000+ 2) Rebuilt 400HP Engine $3,500 3) Rebuild / upgrade original drivetrain $4,000 4) Body panels for rust removal $3,000 5) Suspension $2,000 6) Interior $2,500 7) Bumpers/Roll Bar $2,500 8) 20” Wheels / 37” Tires $4,000 9) Custom parts / bedliner $7,000 10) About 900 man hours of labor 11) Paint ??? The shops that build Early Bronco’s to this standard start at $70,000 for a finished project. That I know of this Bronco has three issues. 1) The fiberglass hood fits horribly. It is bowed in both directions, the front doesn’t line up, and the cowl hits the windshield when opened. The plan was to replace it with a buckaroo hood before paint but I just haven't gotten around to it. 2) The front parking lights shine when the brakes are applied. Should be a simple fix and again I just haven’t gotten around to it. 3) The tailgate rattles and blocks view out of the rear. The plan was to notch the tailgate to match the half doors before paint but as with the other issues it just hasn't made it to the top of the to do list. It is not installed in the pictures but it will be included along with many other parts I have laying around. Contact Rob at 800-852-8277 for any questions or it is available to be inspected at my business Lookout Mountain Tarp located at 1468 Alabama 157, Cullman, AL 35058. Videos How much does shipping cost?The vehcile is available with free local pickup. Shipping is not included but we would be happy to meet and assist any shipping company you hire. Payment Sales Tax For shipments to Alabama addresses, we are required by State law to collect 4% State sales tax. Return PolicyYour satisfaction is important to us and we hope you are completely satisfied with your new purchase. However, we know there will be times that purchasing errors are made or an item may not be quite what you expected. We are here to help you even in those situations. The majority of the products available from Lookout Mountain Tarp are custom tarpaulins, which are made specifically for you when you place an order. Since these products are not kept in stock, they cannot be returned for a refund or exchange. However, it may be possible for us to modify your tarp to better meet your needs. Please contact us by phone at 1-800-852-8277 or submit a Modification Request using the eBay messaging system to see how we can best assist you. In your message, please include your name, the best way to contact you, the item ordered, date of purchase, and what modifications are needed. |