1968 Ford Bronco 5.0 Coyote 6R80 Trans 4x4 Auto Hydratech Power Window

Condition:	Used
Make:	Ford
Model:	Bronco
Type:	SUV
Trim:	Custom
Year:	1968
VIN:	U15NLD55689
Color:	Silver Grey
Engine:	5.0 Coyote Crate Motor
Cylinders:	8
Fuel:	Gasoline
Transmission:	Automatic
Drive type:	4WD
Interior color:	Black/Silver Grey
Drive side:	Left-hand drive
Vehicle Title:	Clean
Item location:	Los Angeles, California, United States

Extras

Power Windows
4-Wheel Drive

Listed by

Private seller

Enquire

Description of 1968 Ford Bronco Custom

For sale is my UNFINISHED PROJECT TRUCK. It is about 85% completed (not running truck).
I started this build with the intention to keep the truck but a business opportunity oversea require me to be relocated so sadly this project will not be finished and if finished nor will I have the opportunity to drive the truck either - So much love and coins had been invested.
All the major modification to this 5.0 coyote sway has been done. You will need to drop the motor and Trans along with other parts.
Here are the details:
This vehicle is currently registered in the State of California. I have pink slip in hand.

1968 Ford Bronco 5.0L Coyote Crate Motor mate with a 6R80 Automatic 4x4 with Dana 20 T-shifter(custom bracket).

BODY
- NO RUST!!! BODY IS SUPER STRAIGHT!!!- Paint was professional done and the color is Silver Grey.- Hood has a functional custom mini scope design for air circulation. The hood painted was done at different time and by different paint shop. It needs some attention as some corners starting to peel.- Interior metal has been Rhino lined and underbody is also coated completely.- Doors shut tight! Beautiful gaping throughtout this truck!- All doors interior mechanic including Door Latch, HD Rods kit and the complete door felt anti-rattle kit with glass tracks NEW! All quality parts!- Door handles and Side Mirrors are NEW!!! - Vent window assembly both are NEW! Quality part with quality chrome finishes!- Complete Body Weatherstrip Kit with doors, windshield and hardtop quarter window upper and liftgate seal rubber molding are from Dennis Carpenter made here in USA NEW!!!- Door Window Frame is removable for this 68' year model only.- Both Inner Fenders had been widen to accommodate the 5.0 Coyote Crate Motor. The Inner Fender re-attached by a series of stain steel screws. The Inner Fender need to be repainted.-Custom AMP research powerstep reinforced plate installed NEW!-95% of the screws had been replaced by Stainless Steel or Grade 8 where needed.

INTERIOR/EXTERIOR
- 90% of the interior is finished. The last step you will need to do is to Dynamat the floor then carpet.- The Hardtop interior has been Shield Dynamat then follow with a 1/4" Dynamat Foam layer then finshed with a ABS shell headliner(Not cheap carboard). The ABS shell is wrapped in Alcantrar with added foam.- Both rear quarter have Dynamat Shield and 1/4" Dynamat Foam.- Both Interior of the Doors are lay with Dynamat Shield and 1/4" Dynamat Foam- Both Doors panel is also Dynamat!!!- Rear quarter panels is a custom-made aluminum panels which also being Dynamat Shield as well.- Power windows has been installed. Up and Down functions using the window handle crank NEW!- ProCar Series (the old style must better quality). Completely redone powder coated seats frame reinforced foam and reuphostery in black leather NEW!- Wildhorse Center console arm pad also got reuphostery in black leather NEW!- Interior door handle are new then wrapped in black leather NEW!- Speaker 8100 Led headlight NEW!- All with LED light kit NEW!- double windshield motor with new rubber arms NEW!- Flaming River Column is painted to match dash NEW!- Custom front and rear bumper to make them look like the original look but much stronger.

CHASSIS AND SUSPENSION
- Chassis is sandblasted and painted.- Rebuild Dana 44 front 4.10 gears with 76 Front Disc Brake conversion.- Rebuild Ford 9 inch 3.50 gears (NEED TO CHANGE GEAR TO 4.10) with Ford Explore Rear Disc brake conversion. Truc-lock with 31 spline axle.- ALL Front and Rear Brake Flex Stainless Steel lines are DOT Approved NEW!- ALL Brake hardlines are EARL's Stainless Steel annealed straight tube with Stainless Steel fitments NEW!- Wildhorse 1.5 Suspension lift kit Bilstein 5100 shock sets with Wildhorse HD shackle NEW!- Wildhorse 1.5 Coil springs with HD springs cup NEW!- Wildhorse front anti-sway bar kit NEW!- Custom heim track bar.- Custom mounting for the Bilstein stabilizer.- BC HD Radius Arms powder coated NEW!- All bushing are NEW!- 17x7 Dodge old school with 255/70/17 BF KO2 (~60-70% tread). The center bored by professional machine shop then powder coated - zero mile since refitted.- Custom rear track bar.- 4 points roll cage is bolted to Chassis.
MOTOR AND DRIVETRAIN
- 2011 5.0 Coyote crate motor has never been fired up. The crank shaft turn every other month or so not to let it sitted NEW!- 2015 F150 4x4 6R80 Transmission has about 15K miles with 2017 Mustang Torque Converter has less than 300 miles. Custom Dana 20 T-shift mounting bracket to the 6R80 not available with any vendors.- PowerByHour 2011-2014 Control Package for Motor and 6r80 Transmission NEW!- Painless 21 circuit wiring harness.- PowerByHour Transmission Coolant Kit and 6R80 fitting NEW!- BC Bronco Serpentine Coyote Kit installed NEW!- BC Bronco Ron Davis Aluminum conversion Radiator NEW!- BC Bronco Cooling Fan with Heater Hose kit NEW!- BC Motor Mount NEW!- BC Cross Member Bracket NEW!- BC Ceramic Coyote headers NEW!- BC Ceramic 2-1 Coyote exhaust NEW!- BC Air Filter system NEW!- BC Oil Fitler relocation kit NEW!- Dana 20 has a complete HD output shaft kit housing from Wild Horses NEW!- WildHorse Stainless steel 23 gallons fuel Tank with steel skid plate with additional custom mounting bracket NEW!- All Fuel lines are EARL's stainless steel annealed straight tube with quality Redhorse braided Stainless steel flex lines, AN fitments and pressure regulator NEW!- New Billet Coyote Starter NEW!- Hydratech Brake "Show Model" NEW!

THE MAJOR PARTS YOU WILL NEED TO COMPLETE THIS BUILD ARE FOLLOWINGS:
- A 6R80 Floor Shifter - A battery- AC kit(if you want AC) The Compressor is there already with the BC Serpentine kit.- Change rear gearing to 4.10 to match front gear.- Original speedometer is included but you can opt for a modern digital speedometer.- .....And other parts depend on your desire build.

This sale come with all original receipts in a huge blinder folder.

Payment and Deposit:
We require a non-refundable $500 deposit within 48 hours of winning the auction via Paypal. Please call email to make arrangements for payment and transport. Payments ONLY IN CASHIER'S CHECK, BANK TO BANK OR CASH (IN PERSON).

Fees and Taxes:
Sale tax, title, license fee, registration fee, documentary fee, finance fee, finances charges, emission testing fees, and compliance fees, etc..are buyer responsiblies. Vehicle is listed locally. We reserve the right to end the auction at any time.
ITEM SOLD AS IS.

Thanks for looking.