Home
Contact us
NEWEST CARS
SELL YOUR CAR
FAQ1990 300ZX Twin Turbo 5 Speed Manual Fully Built 555 HP
| Condition: | Used |
| Make: | Nissan |
| Model: | 300ZX |
| Type: | Hatchback |
| Year: | 1990 |
| Mileage: | 126,000 |
| VIN: | JN1CZ24A7LX000805 |
| Color: | Red |
| Engine: | Twin Turbo |
| Cylinders: | 6 |
| Fuel: | Gasoline |
| Transmission: | Manual |
| Drive type: | RWD |
| Interior color: | Black |
| Drive side: | Left-hand drive |
| Vehicle Title: | Clear |
| Item location: | Mattoon, Illinois, United States |
| Extras |
|
Power Locks, Power Windows CD Player, Leather Seats |
| Listed by |
| Private seller |
 Enquire |
Description of 1990 Nissan 300ZX |
|
Up for sale is my 1990 Nissan 300ZX Twin Turbo with a 5 speed manual transmission. I have owned this vehicle for ~4 years and have put roughly 8k miles on the car. I have put roughly 750 miles on the car in the past week spending my final days with the vehicle :) For the most part she was garage kept during my ownership. The car was recently dyno'd on 7/28/2018 and produced 555 HP at the wheels on 93 Octane with 18.5 lbs of boost. It had three separate dyno pulls within 20 minutes. They were 555, 555 and 556 HP to the wheels. The torque was 441.9, 441.6 and 447.6. In 2016 it dyno'd a little over 600 HP at Dynosty in Louisville KY. This is an extremely fun and powerful vehicle. The car will let loose on you very easily. I do not recommend this vehicle for young or inexperienced drivers. The reason for selling is because I am moving onto a GTR. This car has a fully built engine with roughly 7k-10k miles on the engine. The turbos are the GT675RS Turbos from Z1 Motorsports. The exhaust includes AMS Ceramic Coated manifolds, 3" Downpipes, 3" test pipes with an AEM Uego Wideband on the drivers side (I will include an additional one for the passengers side that is not installed) and a 3" Specialty Z Sebring catback exhaust. Engine mods include JWT Wild Cams (these are noisy in the lower rpm range). The head is ported and polished along with the lower intake. I have over $40,000 worth of receipts between my ownership and the previous owners throughout the years of various parts installed (I will include every receipt I can find). The car runs off of a Haltech Platinum Sport 2000 standalone that replaces the factory ECU. The factory MAF system is replaced with the Haltech MAP system with a 3 bar sensor. The car runs roughly 16-18 lbs of boost normally on 93 octane. The car has roughly 126,000 miles on the body but was repainted by its previous owner. The paint has a few small chips but overall looks really sharp. We did some touch up paint under the hood on top of the fender wells just this week also. It turned out really nice. There are a few rock chips on the vehicle- one on the drivers door and a couple near the antennae come to mind. The interior was redone a few years back and looks great. The seats are black with red stitching- they look and feel amazing. The shift book, ebrake boot, steering wheel, arm rests on the door and also center console all are the black leather with red stitching. It does have some slight wear on the drivers side seat and minimal wear on the passengers side. Overall I would probably rate the interior as an 9 out of 10 for a vehicle this age. The plastic panels in the hatch have some scuff marks on them but overall look very well. I believe the carpet was replaced along with the floor mats and the hatch carpeting. I replaced the amp cover in the rear. It is slightly off in color from the other carpet which seems almost pitch black- it is not too noticeable though. There are 3 Gauges in the drivers side A Pillar- Up at the top is the AEM UEGO Wideband for the drivers side exhaust, the middle is an AEM Electronic boost gauge and the bottom is currently an AEM voltage gauge. I will include a second AEM UEGO Wideband for the passengers side. I purchased this recently just have not installed it. It has an AVC-R with the low boost I believe is set around 16 psi and high boost being around ~18-18.5 psi. The bad: The only real negative I had with the car was that the previous owner pulled the AC system. He pulled the compress, condensor and the lines. Luckily you can still purchase these items from Z1 if you wish to install AC back onto the vehicle. The car is getting an alignment performed on 8/2/2012 and recently had it's oil changed. It could use new tires as the old ones are worn around the edges where the tires rubbed. The current rims on the vehicle are 18 x 8.5 Engine Mods: From Build ~8k Miles ago Fully built VG30DETT motor .40 over Wiseco 8.5:1 pistons/rings ARP head and rod bolts Eagle Rods Cleavite bearings Z1 GT675RS turbos Heads refreshed and cleaned within the past 10k. 5 angle valve job done Newer 94 50K Manual 5 speed tranny JWT 500 cams, retainers, & springs New valve guides and valves All new lifters Intake and exhaust runners ported 95+ fuel rail/plenum setup 740CC Nismo Injectors Walbro 450LPH Fuel Pump Stainless Steel fuel lines - ready for E85 Ported polished interior upper/lower Plenum & Z1 oversized TB's Head covers and Upper plenum powder coated New alternator New brake and clutch cylinders and boosters New water pump New Oil Pump New PS pump and lines SS Pulley set (crank too) JEGS fuel filter (supports E85) Aeromotive A1000 FPR Howe radiator with brackets Nismo thermo Ceramic Coated AMS headers, 3" downpipes, 3" test pipes with dual AEM UEGO Wideband oxygen sensors (Passengers side isn't installed yet but I will include it) New hoses Z1 steel driveshaft New standard battery Dual intake Hicas removed Cruise Control Removed PTU relocated A/C removed New OEM 120K timing parts Motor has been changed with Mobil 1 synthetic every 5K Electrical Mods: Haltech Platinum 2000 Stand alone ECU Colder NGK plugs Apexi AVC-R Boost controller Alpine CD Player Polk Audio component 6.5 speakers x4 Interior Mods: Leather seat skins w Red stitch & Z logoSteering wheel wrap with red stitch Center console with red stitch Shift knob, boot, ebrake knob, and boot with red stitch Black leather replaced all tweed pieces 95+ arm rest with red stitch Custom 180mph speedo HID (white) interior lights AEM electronic boost gauge, AEM UEGO wideband O/2 gauge and AEM Voltage gauge Triple A pillar gauge holder Z floormats Z T Top Bags Exterior mods: New molding Kaminari spoiler JDM taillights clear corner lenses Tinted front turn signals Foglight Ducts LED bulbs 99 JSPEC front bumper Suspension Mods: Eibach Lowering springs (1") New front shocks Upper lower tie rods Hicas bar Bushings installed to minimize wheel hop. Misc: T-top bags T-top shades Additional OEM Parts, various new and used Tons of receipts No lean on the car - clear title Items that are outstanding: Hicas light is on because it was removed Brake light will come on due to LED bulbs 2 small rust spots starting under lower rocker just before rear tire. Must bend down to see it. Belts squeal when you first start up the vehicle and the starter will grind every once in a while. If I get time I will have these fixed before the end of the auction also.-Radio currently does not work. Needs to have a four channel amp installed. The amp is not included- the CD player is.I will include all the extra and spare parts I have also. On Jul-31-18 at 18:36:02 PDT, seller added the following information: Here is a dyno vid from 2 years ago when it did 600+ horse power. On Jul-31-18 at 18:42:32 PDT, seller added the following information: Below is the 600 HP dyno from 2016
|
