1972 PLYMOUTH 572 HEMI ROADRUNNER 5 SPEED 800HP!!!!

Condition:	Used
Make:	Plymouth
Model:	Road Runner
Type:	Coupe
Year:	1972
Mileage:	500
VIN:	RM23P2G137550
Color:	Gray
Engine:	572
Cylinders:	8
Fuel:	Gasoline
Transmission:	Manual
Drive type:	RWD
Interior color:	Black
Vehicle Title:	Clear
Item location:	Champaign, Illinois, United States

Extras

Listed by

Private seller

Enquire

Description of 1972 Plymouth Road Runner

You are bidding on a 1972 Plymouth Roadrunnerthat has a 2nd Gen 572 Hemi, Tremec 5 Speed and aMoiser Dana 60.
The story behind this car is a long one but i’ll try to keep it brief.This 1972 Plymouth Roadrunner was ordered with a 400c.i.Big Block, an A833 23 spline 4 speed and 8.75 with 3.23 sureGrip rear. Bought new by the current owner in 1972, this isone of the few remaining “original owner” Mopar MuscleCars still in existence.
The Roadrunner was driven daily and street raced quiteoften throughout the 1970’s and very early 80’s.Needing work, it was retired to a barn and did not seedaylight again until early 2007 when it was pulled fromits slumber by the owner and his wife.As a retirement gift to her husband, she wanted to havethe Roadrunner restored to its former glory so her husbandso he could re-live his glory years and do a little“Street Terrorizing!"
The problem with returning a well used 1972 anything toits former glory after sitting in a shed for 30+ years is theamount of sheetmetal that faired less than well in thecentral Illinois climate. Thank goodness for AMDreplacement sheetmetal, rust free sheetmetal from outwest and NOS parts.Combine all three and you get a perfect rust free body,framerails and x-members. Add in Torque Boxes andSubframe Connectors to make it super stiff then paintthe whole thing top to bottom in PPG base clear.(Underside is painted and cleared)
The entire suspension was completely rebuilt and SuperStock Springs were added in the rear with air shocks inback to keep with that proper 70’s theme.
The bumpers were sent out for re-chroming, while thegrille and other exterior trim was cleaned up, polishedand painted and put back on the car. The owner addedhand painted Roadrunners on the quarter panels andon the decklid in the factory locations with a bit moreattitude than the originals.
The interior was completely re-done with ACC,Legendary, R.E.M. and Vintage Air among others tomake the interior look as good as it did in 1972. Thegauge cluster was sent out to be rebuilt to have accuratereadings on all of the Elephants vitals and still retainthe stock appearance. Aside from the 5 speed patternand “Day 2” under dash Tachometer, you would neverknow the kind of power lurking under your right foot!
Speaking of Power and Elephants… The owner couldn'tget a 426 Hemi in 1972 when he ordered his Roadrunner,so this go round he wanted to be sure he checked off thebox that said HEMI. But not any old Hemi… He had tohave the most powerful Naturally Aspirated Hemi thatIndy Cylinder Heads offered… And then had them giveit more!!!The 572c.i. HEMI 800+hp!!!!
Here are the specs from Indy Cylinder Head inIndianapolis Indiana-
572 SUPER STREET HEMI WITHINDY 426-S/R ALUMINUM HEADS
AS LISTED770HP @ 6500 RPM$18,495.00700 TORQUE @ 5200 RPMENGINE RAN WITH BRAD PENN 30WT BREAK-IN OILFULLY PREPPED MOPAR SIAMESE IRON BLOCK4.500 BORE—4.500 STROKEEAGLE 4340 STEEL 8 BOLT CRANKEAGLE H-BEAM RODSDIAMOND DOME PISTONS-10.75 TO 1INDY 426-S/R ALUMINUM HEADS2.25 X 1.94—5/16 STEM VALVESMP IRON ROCKERS 1.57 X 1.52COMP SOLID ROLLER CAM.650 / .655 - .272 / .280 R108CHROME VALVE COVERSINDY MOD-MAN INTAKE 2 X 4 TOPEDELBROCK 750 CFM CARBSEDELBROCK LINKAGECHROME TIMING COVER-ATI BALANCERMILODON 8 QUART OIL PAN WITH WINDAGE TRAYMSD DISTRIBUTOR WITH CURVE SETICH WIRES-CHAMPION PLUGS #71-RC12YCENGINE IS INTERNALLY BALANCEDAdd ALL OF THESE OPTIONS$21,400.00Maxx Alum Block$2,440.00Upgrade HiPo Head w/ K-Motion Valve Springs-Titanium Retainers$950.00Indy Roller Rockers$350.00Cast 572 Valve Covers$450.00Road Race Pan w/ External Pick Up$440.00Engine Shipping stand$250.00$21,875.00
Accessory Bundle: Flex Plate, Water Pump Housing,Water Pump, Starter, Dip Stick,Motor Mounts -add $847.00
Extensive valve work and full race porting onheads for 800+ HP
This Beast of an engine needed to be able to cruise onthe street, perform at the race track and handle a Dynowithout overheating so a Griffin cross-flow Aluminumradiator was sourced. With all the Go-Fast Goodies,what good is it if you cant kick on the AC whileBanging gears or cruising 80+MPH on the interstate!?!?The Vintage AC system blows ice cold on the hottestdays and utilizes the factory controller in the originallocation in the cluster.
This Roadrunner was built to drive so the owner addeda Tremec 5 speed built to handle 800+ hp. The owneropted to keep the original Hurst Pistol Grip shift leverwith original grips and the original steering wheel becausethose are the parts he was in contact with the most andthat didn't necessitate replacing. Plus, it means somethingthat this steering wheel was being tightly griped as thatshifter was banging gears in this Big Block Roadrunnersince it was bought brand new in 1972!
To get the power to the pavement and hold up to theMonstrous amounts of Torque the 572” Hemi, the original8.75 rear differential has given up its real estate in leu ofa Moiser built Dana 60 with Strange axles and a 3.73 gear ratio.
There was no corner cutting when it came to buying allof the right toys to make this Beast move like a over sizedRocket ship and sound like the True Muscle Car that it is.Making sure the exhaust gasses were expelled as fast asthe Dual 4BBL carbs draw air in, a full 3” TTI Headersand Mandrel Bent Exhaust System was installed with 3"Hemi style mufflers to keep the neighbors windows frombeing ripped out of the walls. The exhaust system exits therear of the car through “Machine Gun” style 3” ReproductionOrange centered factory style exhaust tips.
How do you stop a 800HP Giant Thoroughbred? One word,Wilwood. The 4 wheel Disc Brakes needed to be the strongestavailable to be able to work with the Massive amounts of liftand “0” vacuum from the solid roller camshaft so a Hydroboostsystem was employed and this thing stops on a dime with anickel change!
The current owner opted to go with look he had on the carin the 1970’s and purchased a set of 15” Mag aluminum“slot” wheels and keep with the “Day 2” look and havea blackball tire on the front and a white letter on the rear.This car was completed in 2012 and has had under 500miles put on the car since its complete restoration.
There is well over $100,000 in the build of this 1972Plymouth “HEMI” Roadrunner, this is going to bethe only time anyone viewing this car will be able topurchase a 800HP HEMI MOPAR for this kind of money!!!!!
Do not miss out on this… if the ORIGINAL OWNERchanges his mind then it will probably never be availableagain. There are restored small block 4 speed 1972Roadrunners going for more than where the reserve isset on this HEMI Powered Monster!!!

On Sep-11-17 at 22:48:03 PDT, seller added the following information:

EBAY RULES AND PHONE NUMBER
And now 10 rules you MUST READ!
1. Your bid is a contract! If you are the successful bidder, you are expected to pay! Please have all contingencies handled and your money in place BEFORE you bid! No retractions will be allowed, so be sure BEFORE you bid! Please read and understand this: ASK QUESTIONS AND GET ANSWERS BEFORE YOU BID.
2. A $500.00 NON -NEGOTIABLENON - REFUNDABLE partial payment/deposit is due within 48 hours of end of auction. This can be by bank wire transfer or Pay Pal.Balance is due within 7 days of auction's conclusion. This can be by bank wire transfer as well, and is probably the safest method.
3. Please note that the car is currently at my residence in Champaign Illinois.
4. Vehicle and papers will not leave here until paid in full with cleared funds. If you are paying with ANY kind of check, it must clear MY bank before car or ownership will be released. No exceptions! Please note that with all the fraudulent money orders out there, most banks treat them like personal checks and place a 5 to 7 business day hold on them. Wire transfer is the best method. If you are paying balance on pickup, it must be cash in person. No exceptions.
5. Vehicle is sold strictly as-is at my premisies with no guarantee or warranty of any kind.
6. Transportation is the buyer's responsibility. I will try to reasonably help and accommodate you any way I can, but it still YOUR responsibility.
7. If you cannot pick up immediately, that is fine, it can be left here for a reasonable period. However, it still must be paid for within the 7 days, and you should secure insurance as I cannot be responsible for loss or damage due to circumstances beyond my control or act of God.
8. Please ask and get satisfactory answers to all questions BEFORE YOU BID! Since sold strictly as/is, no warranty or returns, once you bid, you have made a binding contract.
9. Car is advertised locally for sale. If I find a buyer through that venue, I reserve the right to end auction early. Please call or text me at520-730-8699with any further questions and leave a messages if i so not answer.
10. If you have been an Ebay member for less than a year and/or have less than 10 feedbacks, and/or have less than a 95% rating, you MUST contact me BEFORE you bid. Failure to do this may result in my cancelling your bid and blocking you from bidding on my items current and future. I understand that new members can be great customers, but I must talk to you first. Thanks a lot.
I am sorry for all the rules, but it seems that 5% of difficult people spoil it for the 95% who are good. Thanksvery much for looking! Again, please feel free to call or text520-730-8699with any questions and leave a message if there is no answer. Thanks for looking!