1965 PONTIAC GTO - ONE OF A KIND COMMAND CAR MILITARY MUSCLE & FIRST RESPONDERS

Make: Pontiac
Model: GTO
Type: Sedan
Trim: CUSTOM
Year: 1965
VIN: 237275K100183
Color: OBD ARMY MATTE GREEN
Engine: CHEVY 350
Cylinders: 8
Fuel: Gasoline
Transmission: Automatic
Drive type: RWD
Interior color: CUSTOM
Drive side: Left-hand drive
Vehicle Title: Clean
Item location: Fort Worth, Texas, United States
Extras

Listed by
Private seller
Enquire

Description of 1965 Pontiac GTO CUSTOM

1965 PONTIAC GTO - EXTREME CUSTOM


COMMAND CAR FOR MILITARY MUSCLE and FIRST RESPONDERS


COMPLETE CUSTOM FRAME-OFF RESTORATION


This vehicle is not the norm for our shop, but it has instilled in us the true desire to honor all the military and first responders that serve our country with their lives on a daily basis.These men and women serve us proudly without hesitation.They work every day to ensure our FREEDOM because freedom is not FREE!

The stock full frame has been cleaned and painted with POR-15 resulting in a clean gloss finish.

The rear end is a rebuilt 12 bolt Chevy unit with 3.73 gearing.

The rear suspension consists of CPP (Classic Performance Parts) tubular 4-link control arms that locate the rear axle in the frame with black polyurethane bushings and new coil springs.

The front suspension consists of CPP (Classic Performance Parts) tubular upper and lower control arms with a 2" dropped spring pocket and a 2" lower coil spring that connects to new spindles with a CPP (Classic Performance Parts) front sway bar. The complete steering system from the steering box to the tie rod ends is new.

The brake system has been upgraded with chrome dual reservoir master cylinder and chrome vacuum booster.A fully adjustable proportion valve allows adjustment for the four wheel disc brakes. New steel brake lines and rubber brake hoses complete the upgraded system.

The fuel system has been rebuilt and upgraded with the following items:

- New fuel tank and fuel sending unit were installed.

- New fuel lines were installed that would be compatible with the fuel injection.

- External high pressure fuel injected fuel pump and pre and post fuel filters were installed.

- The fuel injection system is a S.D.S by Chico Kodama at the Moon Eyes Company.

- The 6 throttle bodies started out as a solid billet piece of aluminum and were milled to look like 97 Strombergs. Each one has two fuel injectors in them. The throttle bodies are mounted to a special "SIX" pack manifold. The fuel constant 45 PSI fuel pressure is controlled by a billet fuel regulator with a gauge.

- The fuel injection main computer box is mounted in the passenger compartment along with the programmer control box. The control box is mounted center stage in the custom dash where it can provide constant engine information for on the fly calibration adjustments to be made.

- Fine adjustment mixture knob is also mounted in the dash in arm's reach of the driver.

- Cold start idle control solenoid switch has also been added to the fuel injection system to aid in cold start-up idle. This switch is a real Aircraft locking two-stage switch.

- Custom throttle linkage and transmission kick-down control systems were installed.

- Be Cool aluminum radiator with twin electric fans keeps the engine cool.

The engine is a GM Performance 350 crate engine with a moderate camshaft. The relocated engine mounting pads move the engine rearward for a better weight balance. The engine is mated to a TH350 automatic transmission with a 2500 stall converter. A freshly rebuilt drive shaft sends the power to the rear axle. The Lokar shifter has been modified to accept a modified "authentic attack helicopter aircraft joy stick" for the handle. The SILVER button shifts the transmission, and the RED button fires the horn!

The tires are low profile Hankook with 225/45ZR17 on the front and 245/45ZR18 on the rear. The rims are Billet Specialties Five Spoke aluminum rims that have been custom painted with a two-tone design to match the body colors.

The body has been completely rebuilt with new interior and exterior rear quarter panels, rocker panels and a complete new floor. All remaining panels were worked and epoxy primed before moving into the painting process using OBD Army Matte Green. The completed underside of the body and inner front fenders were sprayed with under coat. The interior floor is sprayed with Raptor bed liner for a rugged look that will clean up easily. A new black headliner and sail panels were installed. The door panels and rear seat interior panels are custom aluminum panels embossed with the skull logo of the American sniper "The Punisher" that were custom built for this project by Big Wig Race Cars. The dash has been updated with custom AutoMeter gauges. The dash and center consoles' chrome trim has been painted in a hammer tone of silver and black. This hammer tone has been carried outside to the body panels and is applied to all trim parts. This hammer tone has also been used on the new front and rear bumpers. Front fenders' GTO emblems have been customized with hammer tone silver, black and white scheme. The front and rear GTO emblems and Pontiac logo are painted in fluorescent white. The original front bucket seat frames were stripped and rebuilt. The foam was custom contoured and covered in a custom designed ultra leather consisting of an old school black and a digital green and silver camouflage center insert that carries to the back of the seats and to the rear bench style seat. To top it all off, all seats have "Special Operations" black and white American flag shoulder patches located in the shoulder blade area. Driver and passenger side visors have been custom made to locate the target in front of you. Dark colored Lexan is cut in the shape of a Fighter Pilot sun visor. In the center of each visor is an aluminum ringed cross-hair targeting system. The original steering column has been rebuilt and painted the body color. A pro touring design steering wheel tops the column.

The vehicle was rewired with an American Auto wire system and is ready for any upgrade such as A/C or power windows. All the glass is new including the window felts, rubber guides and seals.

----------------------------------------------------------------


WHAT YOU SEE IS WHAT YOU GET - NO OTHER PARTS AVAILABLE.


YOU WILL NOT BE DISAPPOINTED AT THIS PRICE.


NO TRADES.


THIS IS MY PERSONAL ITEM FOR SALE.


I own Ramsey's Rods and Restoration in Fort Worth, TX. Please call for more details or come by and inspect the item in person. All interested buyers welcome to come and inspect the item personally. No warranties or guarantees are being expressed and/or implied in the sale of this item. Being sold "AS IS".



REFERENCES PROUDLY FURNISHED


Look at my website to view the caliber of vehicles we build. Take a Look At Our Shop!


The shop has been featured in the Fort Worth Star-Telegram Newspaper - Feature Article - Fort Worth, TX; Street Scene National Magazine - Feature Article; FD Luxe Magazine - Featured Ad - Dallas, TX; Arizona Republic Newspaper - Feature Article - Phoenix, AZ; GM's Insight Magazines for Independent Parts Dealers and Body Shops - Feature Article...and multiple awards for Best in Shows, Goodguys Muscle Car Finalist, Super Chevy Gold Cups and more...too much to list!


(Note: This item is currently for sale locally. I reserve the right to end this advertisement early if the item sells outside this listing.)


----------------------------------------------------------------


You can reach me - Stephen at 817-456-6200 (cell)


----------------------------------------------------------------


Seller's payment instructions


Buyer must make a $10,000. deposit payment within 48 hours of close of sale. Seller will also take funds wired directly to bank account. Cashier's check will take at least 10 days to process through banks. Full and final payment of purchase must be made within 7 days of close of sale. Vehicle and title will be released upon all funds being deposited and cleared by all banking facilities. No PayPal or Credit Card payments accepted. $1000. of deposit is nonrefundable if Buyer cancels sale.