1988 Toyota Land Cruiser sitting on a 1994 FZJ80 chassis

Condition:	Used
Make:	Toyota
Model:	Land Cruiser
Type:	SUV
Trim:	Base Sport Utility 4-Door
Year:	1988
Mileage:	206,000
VIN:	JT3FJ62G0J0096240
Color:	Blue
Engine:	4.0L 3956CC l6 GAS OHV Naturally Aspirated
Cylinders:	6
Fuel:	Gasoline
Drive type:	4WD
Interior color:	Gray
Vehicle Title:	Clear
Item location:	Jackson, Wyoming, United States

Extras

Power Locks, Power Windows
4-Wheel Drive

Listed by

Private seller

Enquire

Description of 1988 Toyota Land Cruiser

I picked up this 1988 FJ62 in the summer of 2011. It wasoriginallya Georgia truck and blew up it's motor at 206,000 miles. I yanked the engine, sold good parts from it and tossed the rest. The FJ62 axles are also gone. I do have the FJ62 transmission and transfer case.
The body on this FJ62 is very nice, there is not a spot of rust on it anywhere. It looks to me like it was never used off-road, more a grocery getter and soccer mom truck. It does have a little bit of shopping mall rash, few small dents here and there on the truck, when I say small I mean small. The kind of dents you get from a shopping cart bumping into the side of the truck. The truck was complete when I got it besides no axles. I have stripped all the interior and dash out of the truck. All parts have been bagged, tagged and boxed up. Just the other day I was looking for some nuts & bolts from the ruck and they were very easy to find since I have bagged and tagged the parts. I have everything for the interior including the original seats, carpet, sound deadening, everything.
I took a 1994 FZJ80 Land Cruiser chassis and shortened it 5" to match the wheelbase of the FJ62. The frame shorten was done well and I didn't use some whimpy 120v welder to do it. I used my Miller 212 and plasma cutter on this project, any steel I have added is 3/16" and 1/4" cold rolled. I built all new body mounts on the FZJ80 frame to fit the FJ62 body. It came out really nice. The FZJ80 chassis has e-locked axles that work excellent.
Both front and rear axles are fully rebuilt along with new rotors and pads. The axles are running Aisin free wheeling hubs and the ABS has been removed. I have stock coil springs as well as Slee 4" lifted springs including heavy duty progressive rear springs. I also have a variety of coil spring spacers from Metal Tech and Old Man Emu. I have some custom made rear lower control arms that are made from 2" solid 7075 aluminum and use aJohnnyJoint, these are super nice and alsoadjustable.
I have all parts for this project besides an engine and transmission. I have an LQ4 6L Chevy v8 along with a 4L80e automatic trans along with a Marks Adapter that are all brand new. I also have a H2FA t-case from an 80-series to go behind the Chevy powertrain. I can include this mounted up in the truck for $5,000 extra. Make no mistake, this truck currently has no engine or transmission! Or if you don't like Chevy in your Toyota you can put in a 5.7L Toyota v8 (big bucks!) or say a Toyota diesel like the 12HT.
I am leaving the country in December and so I need to sell this project.
A video of the truck can be seen here on youtube; *edit* Ebay won't let me include the link to the video, very stupid. So simply search youtube for "1988 FJ62 Land Cruiser sitting on a 1994 FZJ80 chassis" my user name on youtube is PortalPatrol.
A more complete description along with a listing of parts follows;
I was and am still building this truck for myself. I have had many Land Cruisers over the years but this was to be my "dream" Cruiser. Thing is I am leaving the USA at the end of the year and do not want to put this truck in storage for years on end. It is not possible for me to have this truck finished 100% before I go.
I had a very nice 1991 FJ80 Cruiser with a v8 in it, I had well over $30,000 into this truck. I rolled this truck in the Saint Anthony sand dunes in July of 2015. It was a light roll but it trashed the body beyond repair. The chassis and all mechanical were fine, I drove it home from Idaho after the roll, over Teton Pass. This is where the large majority of FZJ parts come from. The frame however is from a different 1994 FZJ80 I had sitting around. I have shortened the frame to match the FJ62 wheelbase, it has been shortened 5". The frame shorten was done right and the frame is perfectly square after the shorten, I have pictures to prove this. The interior of the FJ62 has been torn down, all parts are bagged, tagged and boxed up. Factory sound deadening has been removed from the floor. I was going to paint the truck but I do not have time for that now. The original paint on the truck is good though as you can see in the pictures, if you touch it up and do a cut & polish it will last many more years. I was going to paint it because I am not a big fan of this color blue and I had planned to keep this truck 20+yrs. All glass besides windshield is still in the truck and in excellent condition. Original headliner is still in the 62 and also in great condition. Before I tore down the FJ62 I put a battery in it to test the elctricals. Everything on the truck worked except one rear door lock.
1988 FJ62: 206,000 on the body, originally a Georgia truck. Only a body & frame with all interior.-zero rust! A few small dings here and there on the body, parking lot rash.-Nearly $5k in OEM & NOS parts to restore interior and few things for the body.-I have all the original seats, front and back.-I have all the heater stuff except for the rear heater, that is mounted in my buddies BJ40!-brake master and booster, used and original but looks great.-wiring harness uncut and in good condition.-pedals and all that jazz.-steering wheel, column and FJ62 steering box.-All new wiper arm pivot points.-headliner in good shape and still in the truck.-I have all the 62 shifter stuff.-brand new UZJ100 inside rear view mirror, non-power/manual, I am sure it can be made to work in the 62, it is the right color and won't look out of place.
1994 FZJ80 chassis: clean and rust free, unknown mileage. Shortened to 108" wheelbase.-E-locked and rebuilt axles. Low Range Off-Road e-locker wiring kits.-7075 2" solid aluminum rear lower control arms, Johnny Joints.-Front axle is part time 4wd with Aisin hubs. ABS delete.-All new rotors and pads at all 4 corners.-steering converted to GM Y-link with 1-ton tres. Cut & turn on front axle setting caster at 4.5*.-rear stainless extended brake line.-Slee panhard adjusters, new panhard bushings.-all steel and rubber brake lines and fittings.-King steering damper.-Slee 4" front & rear coils, rears are heavy duty progressive.-All new bushings in rear upper control arms and front radius arms, 3* OME bushings in the radius arms iirc.-FJ80 steering box.-FJ80 brake master & booster, good condition.-P/S hard lines.-I have all the FJ80 shifter stuff.-front & rear drivelines, front is freshly rebuilt and balanced.
Misc Parts to use or sell:-x3 trans crossmembers, one from the 62 unmodified, one from the FZJ80 that is unmodified and one from the FJ80 that is modified for a 5.7L and 4L60e.-FJ62 front & rear drivelines, original.-FJ62 & FJ80 fuel tanks, 80 tank has an GM fuel pump already in it.-FJ62 frame, mint, zero rust! Sell it to recoup $$$.-Magnaflow muffler. Used but good.-FJ62 auto trans & t-case. 206k on them. Bellhousing and torque convertor included.-x5 Mickey Thompson Classic 2 wheels, 15"x8.5", they do work on the 80 axles.-"Step sliders" made by CBI Off-Road.-spare FZJ80 front axle housing.-x5 35x12.5" Cooper SST tires, 70%+ tread, the spare is new and never been on the ground.-Slee control arm bushing replacement tool.-FJ62 Jack and tool kit.-FJ80 sway bars, both front and rear, complete.-spare control arms, radius arms, panhards and steering (tie rod & drag link from both 80 & 62).-1.5" Metaltech front coil spacers.-original FJ80 coil springs.-Man-A-Fre radius arm drop brackets.
Complete listing of new parts, I am putting the part number on items I am not 100% sure what they are for.
-Seat belt assembly, front outer. x1-#2 DIN slot bay for dash. x1-door courtesy switch for overhead interior lights. x4-front fender running lights, orange. x2-grab handle mounting hole plugs. x8-grab handle, mounting hole plugs, rear hatch handle. x2-sun visor holder clips. x2-tail gate lock button. x2-rear defrost switch. x2-front left & right wiper arms and blades. x2-front wiper linkage assembly. x1-front wiper arm cover-cap. x2-front door lock knob-cover. x2-front door lock assembly with key. x1-outer door handles. x4-rear hatch lock-latch assembly. x1-LHS rear tail light lens. x1-misc trim clip. x9 I think it is for the front wheel well mud guards. 90467-08011-window washer pump, front. x1-window washer jar, front. x1-misc weatherstripping. x2 69971-90k00-steering column clam shell, top & bottom. x1 each-over head courtesy light, main. x1-over head courtesy light, rear. x1-hood latch cable. x1-hood edge rubber bumps in engine bay. x4-front wheel well inner mud guards, LHS & RHS + front & rear. x4-hood rod clip-rest, plastic. x1-rear hatch window weatherstripping. x1-inside door handle trim-bezel. x2-misc rubber grommet. x1 90480-15002-rear wiper arm. x2-rear wiper arm cap-cover. x2-door lock lever-knob trim. x2-steering wheel horn cover, "Toyota". x1-dash main cluster trim-bezel. x1-door weatherstripping. x2 67861-90A00-door master switch. x1-front door window channel run. x2-rear door window channel run. x2-rear door outer squeegee-weather stripping, chrome. x2-fuse box cover. x1-outeside "Land Cruiser" emblems. x2-turn signal switch assembly (spare). x1 84140-26040-dash cap. x1 This is not a cheapo "cap" this is a brand new OEM dash pad.-windshield weatherstripping x1-rear license plate light assembly x1
The last picture is of an FJ62 on a FZJ80 chassis done by TLC in SoCal, to give you an idea on what the finished truck will look like. Call TLC and ask them what this kind of project will cost! (818) 280-3330