1963 Chevrolet C-10 Patina Air Ride Hotrod Pickup

Condition: Used
Make: Chevrolet
Model: C-10
Type: Standard Cab Pickup
Year: 1963
Mileage: 8,000
VIN: 3C144B113647
Color: Blue & red
Engine: 454
Cylinders: 8
Fuel: Gasoline
Transmission: 4L80e
Drive type: RWD
Interior color: Black
Vehicle Title: Clear
Item location: Jasper, Indiana, United States
Extras
Air Conditioning
Leather Seats

Listed by
Private seller
Enquire

Description of 1963 Chevrolet C-10

If you want a cool, air ride equipped C10 with real patina, look no further! This one has it all and is ready to go anywhere you want to! I've put over 8000 miles on it since I finished it last year and all the bugs are worked out. Just turn the key and go! The fuel injected 454 runs strong, doesn't leak oil, and makes plenty of power to put a smile on your face every time you mash the gas!

The 454 has an Edelbrock Performer RPM intake with a MSD Atomic EFI, MSD distributor, MSD 6A ignition box, MSD wires, Brodix Race-Rite aluminum heads with Comp Cams valve springs and retainers, Comp Cams Pro Magnum roller rocker arms, Comp Cams Magnum push rods, Comp Cams Magnum 280HR hydraulic roller cam with Comp Cams Magnum roller lifters, Pete Jackson gear drive (oil quenched so it’s not noisy), Scat 4340 crank, factory forged rods with ARP rod bolts, SpeedPro forged pistons and molly rings, Canton oil pan, Meziere billet aluminum water pump, GM Performanceaccessorydrive system, Doug’s Header, 3” exhaust with Flowmaster Hushpower mufflers, anda Fluidamper balancer. All this horsepower is cooled by a Derale engine oil cooler with electric fan and an Autorad aluminum radiator with two Spal 13" electric fans mounted to an Autorad aluminum core support.

The 4L80E transmission has a MSD transmission controller, TCI deep aluminum pan, and a TCI 2200 stall lock-up torque converter, and a Derale transmission oil cooler with an electric fan.

A Driveshaft Shop aluminum CV driveshaft transmits all that awesome big block Chevy power to a complete Moser 12 bolt rear end w/ 3.25 gears, True Trac differential, 31 spline axles, and Moser aluminum rear end cover.

The fuel system consists of an Aeromotive Phantom fuel pump installed in analuminum rear mount fuel tank. Fuel pressure is controlled by an Aeromotiveregulator, 10 micron and 100 micron filters, Aeroquip hose and fittings.

Ridetech provided a Level 2 air suspension system, which includes Strongarm upper and lower control arms, Firestone air bags, a 5 gallon RidePro digital compressor system with LevelPro external ride height sensors, custom valved shocks, a front MuscleBar, and billet aluminum tie rod adjusters. You can choose from 3 height presets, slammed, normal ride height, and raised at the touch of a button.

Stopping power comes from a complete CPP 13” drilled and slotted 4-wheel disc brake system with a Hydratech hydrabooster and dual master cylinder.

If that wasn’t enough, this great truck also has an American Autowire harness, Arizen leather bucket sport seats, Intro Pentia 18” billet wheels and Nitto Invo tires, Digital VHX gauge cluster with GPS speedomete, an ididit chrome steering column, a Lecarra steering wheel, Lokar billet gas, brake & clutch pedals, a Lokar shifter, an Optima RedTop battery, a great sounding Sony & Kicker sound system, Vintage Air Gen IV AC system, new weather stipping, a new windshield, new chrome bumpers, and Altman “Easy Latches” so the doors close like a modern truck.

Thanks for looking!

On Sep-19-16 at 16:47:14 PDT, seller added the following information:

Additional info…

The 454 is a 4-bolt main block, bored .030” over, and aligned honed with ARP main bolts. In fact, just about every fastener on the engine is from ARP. It also has a 2-piece billet aluminum timing gear cover, which means you can change the cam without breaking the oil pan seal.

The interior has Fat Mat under the floor mat, inside the doors, and on the rear of the cab. The window wipers have been upgraded to a modern 7 speed motor, which has 5 intermittent speeds, low constant, and high constant.

Both rockers and cab corners have been replaced with new sheet metal and repainted to match the original patina. Emblems, side view mirrors, interior door and window cranks, rear view mirror, and arm rests are new.

The license plate holder is hinged to allow access to the receiver hitch in case you want to pull a trailer. It doesn’t have an electric brake controller, but it does have a four pin plug for the lights.

The sound system consists of a Sony head unit, 9 Kicker speakers (4 tweeters, 4 mids, and a 12” Solo-Baric sub) and a Kicker ZX700.5 amp.

On Sep-20-16 at 13:37:47 PDT, seller added the following information:

I just lowered the reserve so don't give up yet!

On Sep-21-16 at 14:34:24 PDT, seller added the following information:

If you're interested in seeing the build up of this truck, go to this page on the C10 Forum:
c10forum.com/forum/showthread.php?t=15162