1971 Chevrolet C-10, 383 FI, 700R4, 12 bolt, OE paint, Professional High $ build

1971 C-10 Custom Deluxe

Professionally built by Heath Elmer Restorations in Mesa Arizona using the best parts the Industry has to offer.

We started with a clean life long Arizona factory short bed with 96k box A miles. It was factory equipped with a 350, AT, AC, PS, PDB and a 12 bolt axle. We then completely disassembled it and built from the frame upleaving only the paint untouched. Every single nut and bolt has been turned.All the patina you see is real, it has not been clear coated we just buffed it out and put all the trim and emblems back on. It has some dings and scrapes from 46 years of being a truck but overall it was too clean to repaint it. The bed floor is very straight, no dents or damage. Never a work truck, still has the original "disc brakes" decal on the tailgate.

There are no leaks, rattles, shakes or vibrations. Everything works! It's an absolute blast to drive, you could hop in right now and drive it to NY. Very fresh build with only 650 miles of shake down on it. Fast, Reliable, stops on a dime and rides like a dream. The AC is ice cold, heat is hot and the Fosgate/Bluetooth stereo system is amazing.I've towed my car trailer and 19' travel trailer with zero issues.No hidden rust or body filler, nothing to hide. Door corners, floors, rockers and cab corners are spotless.

FI Tech, Baer, RideTech, Budnik, Vintage Air, Dakota Digital, etc. this truck has it all. Fully sorted and ready to go!

All parts listed below are NEW with less that 700 miles:

Engine:

Fuel Injected BPE Crate 383ci- 432 hp / 452 tq (Dyno sheet included)

10:1 hypereutectic pistons

Steel crank,

4 bolt mains

Hydraulic roller camshaft

202/160 aluminum heads

One pc rear main

FI Tech fuel injection- 600hp version

Aluminum AirGap intake

1.6 full Roller rockers

GM Motorsports tall valve covers w/ billet oil filler

Double roller timing chain

High torque Mini starter

140 amp one wire alternator

8" SFI damper

Hedman shorty headers, ball flanges

Dual 2.5" into single 3.5" through the frame and over the axle full length mandrel exhaust with band clamps

3.5" Vibrant stainless muffler

HD Waterpump

OE Fan clutch

GM fan

Thermostat housing and thermostat

PS pump with welded return for Hydraboost

HEI distributor

MSD 8.5mm wires

Squeegs wire separators

Walbro 340 in tank pump

Billet 100 micron fuel filter

Earls Vapor Guard 3/8" hoses and fittings

Motor mounts

All ARP stainless fasteners

Green Filter Co. 3" filter

Spun Aluminum air cleaner

Remote breather system w/-10 hoses

Green Filter Co. breather

Transmission:

Custom built 700R4 transmission

2800 stall lock up converter

Aluminum finned pan with drain plug

SFI flexplate

BowTie overdrives bracket and cable

Transmission mount

Lokar shift linkage

Setrab transmission cooler -6

All -6 trans fittings and lines

Brakes:

Baer Pro+ 6 piston front 14" 2 pc rotors

Baer SS4+ 4 piston rear 13" 2 pc rotors

Hydraboost brake system

All stainless brake lines

Baer billet master cylinder

Modified brake pedal for more leg room (I'm 6'1)

Custom high pressure hoses and fittings

Chassis:

CPP modular drop spindles

RideTech Street Grip suspension front and rear

RideTech sway bar

RideTech full length panhard bar

Fox adjustable shocks

Hypercoil springs

C notched (welded in) *Truck could be lowered more if you desire

Front frame is welded for strength at the steering box

Frame is fully powdercoated

Powdercoated front control arms w/Ridetech bushings

Powdercoated rear truck arms w/new bushings

CPP 500 steering box

B&M power steering cooler -6

-6 fittings and lines

CPP rag joint

Idler, pitman and tie rods

RideTech front shafts

Upper and lower ball joints

Cab bushings

Bed bolts

Brass 4 core OE radiator

Factory 12 bolt axle

Eaton Detroit TruTrac posi

GM 3.73 gears, all new bearings and seals

3" Aluminum driveshaft (one pc)

1330 U joints

Hidden class 3 receiver hitch

Wheels/tires:

Budnik (Surface series) 20x8.5 - 20x10 "Hawk" wheels, ceramic coated

Toyo Proxes STII tires 255/45 front 295/40 rear

1/2-20 spline drive lugs

Interior:

Dakota Digital VHX dash with Performance data logger

Budnik steering wheel, ceramic coated

GM bench seat with headrests

Seat recovered in vintage plaid fabric

Lowered seat brackets

Raptor lined and Dynamatted

All new smoked glass

Windsheild

Tinted windows

Rebuilt vent windows

Rebuilt door latches

Newport Engineering 2 spd wiper motor

Tilt column

Completely finish behind the seat

ACC carpet

Custom fabricated cup/phone console

Custom floor mat and kick panels

Sill plates

Visors and rods

rear view mirror

exterior side mirrors

arm rests

dash pad

door panels

3 point seat belts with GM logos

Custom fabricated glovebox liner

Window regulators

Door regulators

Billet lock knobs

Door lock mechanisms

Ignition switch

Headlight switch

Newport Wiper switch

All door handles in and out

Dual under dash dome lights

Upper dome light

Climate control:

Vintage Air Gen IV

Vintage Air billet electronic controller

High flow mini tube condenser

Vintage Air dryer and switch

Polished Sanden AC compressor

Custom AC hoses

Billet bulkhead

R134 charge

Sound System:

Done by Sound Xpression Mesa, AZ

Kenwood CD deck

Bluetooth (hands free)

USB connection

Working lighter for charging

Rockford Fosgate amp

Rockford bass controller

Rockford Fosgate mids

Custom box with flushed amp and 2- 10" JL subs

Pager alarm system with shock and tip sensors

Misc:

All belts and hoses

Gates shrink clamps on all hoses

All ARP polished fasteners or grade 8 on entire truck

Custom one off Billet finish washers used everywhere

OE Hood hinges

C5 Corvette fuel vapor canister (no fuel odor in the garage)

Flip up license plate bracket

7 way trailer plug

Boyds aluminum rear mount tank

Custom fuel fill (not in the floor)

Powdercoated firewall plates

Optima battery

Battery tray

Wiper arms and blades

American Autowire Hi way 15 harness (blade fuses)

All weatherstrips, seals, bumpers and gaskets

All body side trim, upper and lower

Chrome bumpers and brackets

Wheel well liners -powdercoated

All lights and bezels

Grill and emblem

Grill shell

I have a clean, clear AZ title in my name notorized and ready to transfer.

Please call 602-670-8880with questions.

I will Email pictures of anything on the truck to serious buyers, again there is nothing to hide.

Matching travel trailer is available butnot included in the auction.

Not interested in any trades, selling it to make room.

Thanks for looking