Ford GT40R MK1 Superformance historic race car

1966 GT40 Mk I ‘R’

Chassis No.:GT40P/2095

Continuation Model by Pathfinder/Superformance

GT40P/2095 Holman Moody

Race-prepared by Holman Moody - who along with Shelby American prepared GT40s for Ford in the 1960’s - this incredible car comes with a proven race history.All original, including right-hand steering and a Holman Moody 302 engine with full Webers.

GT40P/2095R

This car is a GT40R shipped from the factory in a brilliant black finish.The gold stripes and numbered rondials were added using a base coat clear coat application.The remaining decals on the car are all made from removable vinyl.This is an exact continuation model 1966 Mk. I.

Summary:

302 Holman Moody Engine

Moldex crank

Dart block

AV dry sump

JE pistons

Carillo Rods

Aluminum Fly wheel

Weber intake with 48 IDA carbs

Air Flow Research aluminum heads

5 speed ZF transmission with polished gears

FIA fire suppression system

Bundle of Snakes exhaust

FT3 dual fuel cells

Endurance race brake pads

Widened rear halibrand wheels

Avon Tires

Custom Aluminum seat (adjustable)

Gurney bubble

Custom aluminum center console with hour meter and cool shirt controls

O2 guage

Custom oversized aluminum oil sump

additional oil cooling fan on oil cooler

MSD on switch (enables oild pressure to build prior to start up)

Custom aluminum heat shields

Plexiglass windshield

Screened air filters

Custom race springs

Custom double adjustable nitrogen shocks (these have schrader valves that can be charged easily on the car)

Many other improvements

Custom sway bars front and rear (originals included)

Performance friction rotors.

This car is race tested.Took second in its first race.All set ups are complete.

Chassis:

Once the car was received, and being an experienced 30 veteran of racing the following revisions were made to the chassis:Standard shocks were removed and double adjustable, for bound and rebound, nitrogen filled Bilsteins were added.These shocks come equipped with a schrader valve (similar to a tire valve), which enables you to add nitrogen to ensure the shocks are operating in the proper pressure range.The stock springs were discarded and full racing springs were added so stability both on the straights and in the corners is maintained.The stock sway bars were also removed and heavy-duty adjustable sway bars were added so you could tune them for the track you are driving.Many of the heavy steel cover plates were removed and replaced with light weight polished aluminum.

Body:

The fans were removed from the radiator to eliminate weight.As long as you are at speed these are not required. Aluminum ducting was added to the side ducts for additional cooling to the oil cooler.Aluminum side ducts for brake cooling has also been added along with custom brake cooling housings around the rotors both front and rear.

The steel fire wall was removed to accommodate the light weight racing pulleys and a custom polished firewall was fabricated and installed in its place.The factory center console has been replaced by a polished aluminum console that houses the hour meter and the controls for the cool suit equipment.A pedal rest was installed for the left foot to aid in relaxing the clutch leg for long endurance racing.The standard interior was removed and, in its place, a custom adjustable aluminum seat was installed.This gives the driver lateral support.A head rest was also fabricated to meet current rules and regulations.

Engine:

A very special Holman Moody race 302 was built for this car at great expense.Lee Holman started from scratch with a dart block, Moldex crank, JE pistons, carillo rods, Airflow research heads, aluminum flywheel and topped it off with a set of finely matched 48 IDA webers. The engine develops 550hp at the wheels.With the bundle of snakes this baby howls on the track.

Coupled to the engine is a ZF 5 speed that has had custom shifter bushings to ensure smooth shifting and custom ratios good for all US tracks.A custom over-sized oil sump with heater has been installed.The dry sump motor has a 4 stage pump that more than satisfies the engines demand.The oil cooler has a dash switched fan that keeps the engine oil running at a constant temperature.

Heat shields made of polished aluminum keep the heat of the headers away from the oil cooler.Custom aluminum overflow tanks for water filling, oil and transmission venting are installed under the rear deck.An MSD ignition has been added that is switched at the dash.This feature enables you to build oil pressure prior to firing up the engine.All the hoses are Samco race hoses with double clamping. A Bosch mini alternate and a hi torque starter was installed for weigh saving and reliability.

Wheels:

The wheels are BRM that have been widened at the rear by 2 1/2".These along with the Avon race tires fit beautifully within the body.

Brakes:

All four corners have Performance Friction rotors with Wilwood calipers and KPF racing pads.All cooled with custom ducting.

General:

This car’s first outing came in second in a two-hour endurance race at the Jefferson.

At Watkins Glen it ran second only to retire with two laps remaining due to a flat tire.